S Push-shoot special fixed soundproof window series

Product

S808、S1008 two types

◎The pattern can be divided into integral molding or male-female coupling. Vertical types are all integrally molded.
◎Outer Frame: Available in two sizes, 8cm and 10cm.
◎Glass Grooves: 16mm and 26mm.
◎F Fixed Glass Installation Method: Can be installed internally or externally.
◎Wind Resistance: 480 kgf/m².
◎Air Tightness: 2 m³/h·m².
◎Water Tightness: 100 kgf/m².
◎Sound Insulation Level: According to STC=42dB.

※The performance data listed above are all measured under standard laboratory conditions. Actual results may vary depending on individual subjective perception, environmental conditions, installation method, glass type, thickness, and other factors.

S push-shoot window accessories (Can be freely selected according to needs.)

Synchronized Triple-Point Handles (Standard Equipment)
◎Enhances the water tightness and air tightness of soundproof windows, with tight and seamless seals, achieving optimal soundproofing effects for doors and windows.
(For top-hinged windows: Minimum width W of 45cm and minimum height H of 44cm are required for installation. S10推開把手.jpg

S push-out three-point interlocking double-sided handle(optional)

雙面把手.jpg

S Push-out External Restrictor

(Standard Equipment)

◎Can limit the opening space of the window to prevent the risk of falling and can also be used for temporarily fixing ventilation openings.
◎For push-out windows with a height below H89cm, the S opening restrictor is not installed.
◎Top-hinged windows cannot be fitted with an S opening restrictor. S10推開-開口限制器.jpg

Rear-button Dual-side Push-out (Optional)
◎Special rear-button hardware design allows the window to open in two ways.
◎Suitable for smoke vent windows, emergency escape windows, and entrance doors.